Betekenis van:
pack on

Werkwoord

Voorbeeldzinnen

1. There was a pack of paper on the table.
2. He put a pack of cigarettes on the table.
3. You should pack a lunch so you'll have something to eat on your hike.
4. In the case of lots in retail packings, the weight of the incremental sample shall depend on the weight of the retail pack.
5. Where the size of the battery, accumulator or battery pack is such that the symbol would be smaller than 0,5 × 0,5 cm, the battery, accumulator or battery pack need not be marked but a symbol measuring at least 1 × 1 cm shall be printed on the packaging.
6. The most reproducible method for measuring the vapour pressure of liquids is to coat the liquid on glass beads or on an inert sorbent such as silica, and to pack the holder with these beads.
7. The meaning of the distinguishing number of the producer shall be explained on a separate notice in the case of eggs sold loose and on or in the pack in the case of packed eggs.’;
8. In the case of cheese samples packaged at the retail outlet, it may be necessary to ask for the information on the required product and labelling details and/or refer to the wholesale pack for this information.
9. Comments: There is a practical need for being able to pack explosive substances together with detonators on the same vehicle when transporting such goods from where they are stored to the workplace and back again.
10. In the case of cylindrical cells, the symbol shall cover at least 1,5 % of the surface area of the battery or accumulator and shall have a maximum size of 5 × 5 cm. 5. Where the size of the battery, accumulator or battery pack is such that the symbol would be smaller than 0,5 × 0,5 cm, the battery, accumulator or battery pack need not be marked but a symbol measuring at least 1 × 1 cm shall be printed on the packaging.
11. Figure 10 shows a liquid sample holder and sorbent system. The most reproducible method for measuring the vapour pressure of liquids is to coat the liquid on glass beads or on an inert sorbent such as silica, and to pack the holder with these beads.
12. If not all the information referred to in points (a) to (d) is present on the label, the sampler shall ask the owner or manager of the retail outlet for the missing information on the product and labelling details and/or refer to the wholesale pack for that information.
13. Based on verified data the indexed price for the same pack imported from the PRC would be 30 and the imposition of provisional anti-dumping measures would lead to a duty indexed of 4 taking into account the respective market share of the dumped imports.
14. In order to make sure that packing centres are adequately equipped to grade eggs and pack Class A eggs, they should also be authorised by the competent authorities and receive a packing centre code that facilitates the tracing of eggs placed on the market.
15. "Laser" Vaporization uses either pulsed or continuous wave "laser" beams to vaporize the material which forms the coating; 4. Cathodic Arc Deposition employs a consumable cathode of the material which forms the coating and has an arc discharge established on the surface by a momentary contact of a ground trigger. Controlled motion of arcing erodes the cathode surface creating a highly ionized plasma. The anode can be either a cone attached to the periphery of the cathode, through an insulator, or the chamber. Substrate biasing is used for non line-of-sight deposition. N.B. This definition does not include random cathodic arc deposition with non-biased substrates. 5. Ion Plating is a special modification of a general TE-PVD process in which a plasma or an ion source is used to ionize the species to be deposited, and a negative bias is applied to the substrate in order to facilitate the extraction of the species from the plasma. The introduction of reactive species, evaporation of solids within the process chamber, and the use of monitors to provide in-process measurement of optical characteristics and thicknesses of coatings are ordinary modifications of the process. c. Pack Cementation is a surface modification coating or overlay coating process wherein a substrate is immersed in a powder mixture (a pack), that consists of: 1. The metallic powders that are to be deposited (usually aluminium, chromium, silicon or combinations thereof); 2. An activator (normally a halide salt); and 3. An inert powder, most frequently alumina.